Analysis of Deformation Mechanism of Sliding to Bending Slope and Study of Deformation Emergency Control at Huangshan Expressway
Received date: 2008-04-14
Revised date: 2008-04-18
Online published: 2008-05-10
Huangshan expressway is located at mountain area in southern Anhui Province. The Tangkou ramp slope generated deformation during the expressway construction, which affected the safety of constructed building and workers. The construction organization organized "Emergency Commander Group", which adopt quick reaction mechanism to assure the slope safety. Engineering geological survey, exploration, and monitoring were adopt to study the slope structure quickly. Then, the mechanism and stability of the slope were analyzed aimed to design emergency control scheme. The studied result indicated that the slope is bedding slope interbedded by sandrock and argillaceous sandrock, which exists weak layers between bedding planes. Slipping to curving deformation happened during the slope formed, and the curved rock mass were excavated during construction of expressway roadbed, which induced rapid deformation of the slope. According to analysis mentioned above, the ramp slope may be destabilized during rainfall or excavation. Based on analysis of slope deformation mechanism, the emergency control scheme including friction piles, prestressed anchors and drain was designed by deformation control theory, and support steps were put forward according to the slope deformation characteristics. The large deformation was controlled which reached safety request of expressway when the emergency controlling measures were implemented indicated by displacement monitoring curves.
Ju Nengpan，Zhao Jianjun，Deng Hui，Huang Runqiu，Duan Haipeng . Analysis of Deformation Mechanism of Sliding to Bending Slope and Study of Deformation Emergency Control at Huangshan Expressway[J]. Advances in Earth Science, 2008 , 23(5) : 474 -481 . DOI: 10.11867/j.issn.1001-8166.2008.05.0474
[1] Huang Runqiu. Mechanism of large scale landslides in western China [J]. Advances in Earth Science，2004，19（3）:443-450.[黄润秋.中国西部地区典型岩质滑坡机理研究[J]. 地球科学进展，2004，19（3）:443-450.]
[2] Huang Runqiu，Zhao Jianjun，Ju Nengpan，et al. Study on deformation mechanism and control method of rock method of rock bedding slope along highway [J]. Chinese Journal of Rock Mechanics and Engineering，2007，26（2）: 239-246.[黄润秋，赵建军，巨能攀，等. 汤屯高速公路顺层岩质边坡变形机制分析及治理对策研究[J]. 岩石力学与工程学报，2007，26（2）: 239-246.]
[3] Zhao Jianjun. Study and Application on Rapid Slope Stability Evaluation Method for Highway [D]. Chengdu: Chengdu University of Technology，2007.[赵建军. 公路边坡稳定性快速评价方法及应用研究[D]. 成都:成都理工大学，2007.]
[4] Yan Ming，Chen Jianping，Huang Runqiu，et al. Engineering geological analysis on intermediate state before slide-bending failure for rrock slope [J]. Water Resources and Hydropower Engineering，2005：36（11）:41-44.[严明，陈剑平，黄润秋，等. 岩质边坡滑移—弯曲破坏中间状态的工程地质分析[J]. 水利水电技术，2005：36（11）:41-44.]
[5] Chen Jingxi，Zhang Guang，Yuan Conghua，et al. Analysis and treatment of bedding-slip cut slope [J]. Chinese Journal of Rock Mechanics and Engineering，2002，21（1）：48-51.[陈静曦，章光，袁从华，等. 顺层滑移路堑边坡的分析和治理[J]. 岩石力学与工程学报，2002，21（1）：48-51.]
[6] Zhang Zhuoyuan，Wang Shitian，Wang Lansheng. Analysis Theory of Engineering Geology [M]. Beijing：Geology Press，1994.[张倬元，王士天，王兰生. 工程地质分析原理[M]. 北京：地质出版社，1994.]
[7] Schedigger A E. On the prediction of the research and velocity of catastrophic landslides [J]. Rock Mechanics，1973，5: 231-236.
/
| 〈 |
|
〉 |
甘公网安备62010202000687
